BlackBerry Latest version Z10 / Z30 OS 10.1.0.1845 Official Autoloader free Download.If you need to upgrade your operating system (OS) and your BB10 device won't upgrade otherwise; or if your over-the-air upgrade failed, try this process.his is also a good process IF you want a complete wipe and new OS installed to start with a like-factory fresh device.there is also a good illustrated step by step located here.If you are not experiencing device issues, and need to upgrade with a less-invasive OS install (you don't need a device wipe and don't want to overwrite your settings and data), use this method described here: Upgrading BB10 OS Using Sachesi ,These directions apply to Classic,Passport, Leap, Z30, Z10, Z3, Q10 and Q5 models.This process will wipe your device, see the notes below in the instructions.Check your Model Number at Settings > About > Model Number, and make sure you download the corresponding file below!
Downloads
BlackBerry OS 10.1.0.1845 official autoloader
Latest updated versions
Software version 10.2.1.2102
BlackBerry Z10 10.3.1 Autoloaders
Z10 10.3.1 STL100-1 Autoloader Z10 10.3.1 STL100-2 Autoloader Z10 10.3.1 STL100-3 Autoloader Z10 10.3.1 STL100-4 Autoloader
BlackBerry Z30 10.3.1 Autoloaders
Download
Remember, this process will totally wipe your device, so the backup is important.
Download the file above to a Windows PC. Extract it from the ZIP file if it is zipped. If it is a ".rar" file, you will need a WinRar unpacking app on your PC to extract the file.
Connect your BlackBerry to the PC. Using Link, do a backup* (see below) of your phone.
Locate the downloaded file and run the autoloader (double click on the EXE file) and a black DOS window appears indicating "Connecting to bootrom". The DOS window processes the install, and begins to load the OS. If you have a security passwored, you will be asked to enter it.
When the OS loading is complete, your Z10 will reboot. Disconnect from the PC, and the device will startup.
Optional but recommended: Wipe your device at your Settings > Security > Security Wipe. This can take 30 mins to an hour.
Go through the required device setup of connecting to WiFi, Agreements, enter your BlackBerryID, and Get Acquainted screens.
Reconnect to the PC and perform your restore using BlackBerry Link.
Now, you will need to re-enter account passwords for email, Twitter, Facebook, etc.
Backup Notes: When you backup using Link, you can make one total backup, or divide that backup into three different databases (Setup | Media | App Data). I always break that backup into the three different databases so that I can restore each separately because I have had some issues with a full restore failing in the App database restore, so then I can safely restore only Settings and Media.
Remember, this process does totally wipe your device, so the backup is important. Reserve about two hours time for the process... performing the backup and restore takes the longest part of the time and will vary according to the amount of data and apps on your BlackBerry.
Post Upgrade device lag, heat, fast battery discharge: After any OS upgrade on a BB10 device, it will take 48-72 hours for the device data syncing of email, contacts, social apps, etc., to complete and finish. High data transfer after an upgrade cause high processor use, which in turn causes high battery usage, which in turn can cause higher than nornal heat from the device. Likewise, high processor use will cause some lag and initial slowness. Ignore and and be patient. It can take the 48 hours for all contacts to sync back to the device. Connect to a good WiFi source and relax. The battery will recover after a few days and you'll see normal battery usage again. Just don't drain your battery to 10% or less each time, top off the charge. You'll notice a difference after a couple days.
0 comments:
Post a Comment
Dear Gsm Visitor's If You Think This Post is Good And useful article So Please Share it. Thank You